25 October 2009

The Paintshop - Slot.It Porsche 956 for the Group C Championship

The next feature on the "Paintshop" is the car which replaced the Porsche 956 "Marlboro" that I painted considering a future participation in racing (as I told here). However, I kind of felt bad about racing that model, so I decided to paint a brand new model (the Marlboro had some woes, ias the chassis and body were used).

While searching for a different livery for the Porsche 956, I was browsing the Racing Sports Cars Archive when I found a nice looking and mostly unknown Porsche 956 that contested the 1984 Le Mans 24 Hours, the #21 "Rollei Cameras" from Charles Ivey Racing, this one:
Since this is also a quite simple color scheme (and I had the silver and black spray cans!), I decided to paint my model based on this car. So, here's the result:
The black section was painted in first place, since the silver paint never dries completely and for that reason, I prefer not to use mask on silver painted sections. I missed the masking on the mid body air outlets and some black "smoke" entered (better seen on the top-down view). If this was a model for the shelves or if I had some extra time to paint the car, I would have corrected this. Since it's a racing car - what the heck, no one will notice it when I blast around the track with it!

After painting the black rear, I allowed it to dry overnight before masking it and apply the silver section. Then it was time to remove the masking tape and apply decals. I chose the #7 in detriment of the original #21, I have this belief that 7 is my lucky number and all my racing models bear this number (well, I was born on a day 7, maybe that's where this superstition comes from). Decals were chosen from assorted letfovers of 1:43 decal sheets I have laying around. I do need some big logos to fit the wings and wide sections of my models, as it brings up the looks on the model quite considerably.

After applying the decals, I painted the black sections (this time with brush...), mainly the dashboard under the front windshield and the headlights housing. The details like fuel inlets ad exhausts were painted in silver. The pilot was also painted on this occasion (I used the replacement Porsche interior from Slot.It). After all dried up, I started covering the body with thin layers of clear varnish and allowed it to dry overnight after some 3 or 4 very thin layers were applied. Then, on the next day I applied a couple "normal" layers of varnish, and allowed it to dry again overnight.

After applying all plastic detail parts, the car was ready to hit the track - only 2 days before the scheduled 1st race! Since this was a very long painting process, I had to resort to a "T-car" I had, the less performing Porsche 956 KH, just to get the mechanical side working. In the end, this car had an astonishing 1st race result, scoring an unexpected 2nd place. But that will be stuff for a next article...

Until next time...

3 comments:

  1. Very well mister Hugo but the paint isn't correct.

    But the efect is good.

    Congratulation...

    ReplyDelete
  2. Bummer, I thought I had done it good this time! :)

    ReplyDelete
  3. Hi my friend...

    Well is nice, but you have forget the small strikes in the black section and the silver section.. but is nice in did!

    ReplyDelete